Specialist broker of used industrial ROVs · Operated by Nautrex Inc. Book a 30-minute call WhatsApp info@myrovs.com

BUYER'S GUIDE

Buying a used ROV: the due-diligence checklist

What to check before you commit: the package, the records, each subsystem, the inspection and the paperwork, plus the red flags to walk away from. Written from the questions buyers ask us most.

10
CHECKS
12
QUESTIONS FOR THE SELLER
8
RED FLAGS

AT A GLANCE

Buying a used ROV: the short answer

Before you buy a used ROV, confirm that it fits the job, get a written inventory of the package, check the hours, the service records and the umbilical tests, see it working in the water, confirm that the seller owns it, and pay only through escrow. The expensive surprises usually come from an incomplete package or an unknown history, not from the vehicle itself.

Written by myROVs, a specialist ROV broker, from the questions buyers ask us most.

Start with
The job: depth with margin, current, tooling and tether length (check 1)
Biggest hidden costs
The umbilical or tether, missing parts of the package and missing spares
Must see
A function test on deck and a wet test (what to see working)
Documents
Written inventory with serial numbers, service log, umbilical test results, proof of ownership
Payment
Through escrow only. On brokered deals a refundable deposit comes first, then the balance
Warranty
Usually none: the inspection and the acceptance terms in the contract are your protection
Walk away if
The seller wants a direct transfer or refuses an inspection (red flags)
Export
Systems rated deeper than 1,000 m may need an export licence for some destinations
Updated

THE CHECKLIST

What to check before you buy a used ROV

A used ROV can deliver the capability you need at a fraction of the cost and lead time of a new system. It can also be an expensive lesson if the package is incomplete or the history is unknown. Work through these points before you sign.

1. Fit for the job

Start with the work, not the model. Confirm depth rating with margin, thrust for the currents you will meet, payload capacity for your tooling and sensors, and the tether length the job needs. A system that is excellent elsewhere may be marginal in strong tidal flow.

2. What the package includes

  • Vehicle, with its exact configuration and options
  • Tether management system (TMS) and launch and recovery system (LARS), if any
  • Umbilical and tether: length, type and age
  • Control van, console, power supply and transformers
  • Cameras, lights, sonar, positioning and other sensors
  • Manipulators, tooling skids and cleaning tools
  • Spares package, manuals, software and licences

Ask for a written inventory. Two listings of the same model can differ by a large amount once the package is counted.

3. Hours and service records

Ask for logged dive hours, the date and scope of the last major overhaul, who performed it, and the maintenance log. Missing records are not always a deal-breaker, but they should be reflected in the price and the inspection.

4. Umbilical and tether

Ask for electrical (insulation resistance) and optical test results, the length, any terminations or repairs, and how it has been stored. Umbilical replacement is one of the largest hidden costs on a work-class system.

5. Thrusters, hydraulics and electronics

Check thruster condition and spares, hydraulic power unit hours and leaks on hydraulic systems, the state of pods, connectors and seals, and whether electronics are current or obsolete. Ask what parts are still supported by the manufacturer.

6. Cameras, sonar and sensors

Confirm models, firmware and calibration dates. Sensors are often the first things upgraded, and the most expensive to replace.

7. Inspection and wet test

Arrange a physical inspection by someone who knows the system, ideally with a function test on deck and a wet test in a tank or harbour (what to see working). Agree in the contract what happens if the inspection finds problems.

8. Ownership, documents and export

Confirm the seller’s title to the system and that there are no liens. Ask for the original invoices or proof of purchase, certificates and manuals. For cross-border sales, check export classification and the paperwork your forwarder will need.

9. Price, contract and payment

Compare the price with the package and condition, not with the model alone (our ROV price guide explains the drivers). Put the package, inspection terms, delivery point and timing in writing, and pay through escrow. On a brokered deal a refundable deposit goes into escrow before the inspection, and the balance before handover.

10. Support after the sale

Plan for spares, service and training. Check whether the manufacturer or an independent workshop can support the system where you will operate it.

RED FLAGS

Red flags: when to slow down or walk away

One of these is a reason to ask more questions. Two or more, and most buyers walk away.

  • “Pay me directly”The seller asks for a bank transfer to a personal account, or refuses escrow. It is the most common setup for fraud on high-value equipment.
  • No inspectionThe seller will not allow an inspection or a function test, even once a deposit is in escrow.
  • No recordsNo logged hours, service history or umbilical test results, and no clear reason why.
  • A price far below the marketWell under comparable packages with no explanation. Check the ROV price guide.
  • Missing piecesNo surface control unit, tether or power supply, or key parts “available separately”.
  • Unclear ownershipNo proof of purchase or title, or the system is sold “for a friend” or by someone who cannot sign the contract.
  • A flooding historyWater in pods, thrusters or housings that is not documented with what was repaired and tested.
  • Years in storage, untestedNo recent power-up, function test or wet test after long storage. Seals, batteries and connectors age on the shelf.

BEFORE YOU MAKE AN OFFER

Questions to ask the seller

Ask them in writing. The answers, and how readily they come, tell you a lot about the system and the seller.

  1. Why are you selling, and how long have you owned it?
  2. What exactly is included? Can I have a written inventory with serial numbers?
  3. How many hours does the vehicle have, and when was the last major overhaul? Who did it?
  4. When was it last in the water, and on what job?
  5. Has it ever flooded or been damaged? What was repaired, and by whom?
  6. What are the latest umbilical or tether test results (insulation resistance, optical)?
  7. Which cameras, sonar, sensors and tools are fitted, and on what firmware?
  8. Are the spares, manuals, software and licences included?
  9. Does the manufacturer still support this model and its control system?
  10. Can I see a function test and a wet test, and when?
  11. Is it free of liens or finance, and can you show proof of ownership?
  12. Where is it now, and is it crated and ready to export?

INSPECTION DAY

The wet test, work-class checks and the costs on top

What to see working in the wet test

  • Power-up and diagnostics The system starts cleanly, with no faults or alarms on the surface unit.
  • Thrusters Every thruster in both directions, then station holding with auto heading and depth.
  • Cameras and lights Focus, zoom, pan and tilt, every light, and video recording on the surface unit.
  • Sonar, positioning and sensors Each one giving live data through the control system.
  • Manipulators and tools Every function, under load where possible.
  • Tether or umbilical No faults over its length during the test.
  • After recovery Open what can be opened: no moisture in pods, housings or connectors.

Ask for the test to be filmed. The video helps at handover, and again when you come to sell. A wet test in a tank or harbour does not prove the depth rating, so check the pressure test records too.

Extra checks on a work-class spread

  • Hydraulic power unit Hours, oil analysis, leaks and the last service.
  • Manipulators Make, functions, service records and spares.
  • TMS Tether payout and recovery, the latch, and the condition of the tether itself.
  • LARS, winch and lifting points The latest inspection and load-test certificates.
  • Control van Software versions, video recording and the spares inventory.

Offshore clients often audit a spread against IMCA guidance before it goes to work, so missing certificates cost time later. See work-class ROVs for what a complete spread includes.

Costs on top of the price

  • Freight and crating From where the system is stored to where it will work.
  • Insurance in transit And equipment cover once it arrives.
  • Import duty and taxes In your country, on the purchase price and freight.
  • The inspection Travel for your technician or surveyor, or a workshop’s fee.
  • Re-certification Lifting gear and pressure tests that lapsed in storage.
  • People Training for pilots and technicians on a model new to them.
  • A first service and spares Seals, connectors, a spare thruster or two.

Ask your forwarder for an estimate before you agree the price; on a work-class spread these costs are substantial. The cost of ownership section of the price guide covers the running costs.

FAQ

Buying a used ROV: questions

Often, yes, if the package is complete and the system can be supported where you work. For small inspection jobs, a new professional underwater drone may be simpler; we can advise on both.

Someone who knows that make and model: your own pilot technician, an independent surveyor or a workshop that services the brand. We help arrange access and attend on brokered deals, in person or by live video.

A test of the whole system working in water, in a tank, a test pool or a harbour: thrusters, cameras, lights, sensors and tools working together through the control system, with no water getting in. It shows the system as it will work on the job. It does not prove the depth rating, so check the pressure test records too.

Usually not, unless the seller agrees one. The inspection, a wet test and clear acceptance terms in the contract are your main protection.

Pay only through a licensed escrow service, never by direct transfer to an individual. See the system working, in person or by live video, before the balance is paid. Confirm the seller’s ownership, and check the serial numbers with the manufacturer. Be wary of prices far below comparable packages.

From a few thousand dollars for a small inspection ROV to millions for a complete work-class spread. The package, hours and condition decide where a system sits; see the ROV price guide for ranges by class and model.

Sometimes. Tethered ROVs designed to work deeper than 1,000 m can be controlled dual-use items under the Wassenaar Arrangement list (item 8A001.c.2), depending on their thrusters or a fibre-optic link, and the exporting country may require a licence. We check the classification with both sides before the contract.

TALK IT THROUGH

Ask us about a system or a requirement

Send the system you are considering, or the job you need to do. We reply personally.

We use your details only to answer this request. Privacy Policy

Confidential. We reply personally, usually within one business day.